Be more pessimistic when parsing if/switch/for headers for better error
messages when things go wrong.
Fixes#22581.
Change-Id: Ibb99925291ff53f35021bc0a59a4c9a7f695a194
Reviewed-on: https://go-review.googlesource.com/76290
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
When an opening "{" of a block is missing and after advancing we
find a closing "}", it's likely better to assume the end of the
block. Fixed and removed TODO.
Change-Id: I20c9b4ecca798933a7cd4cbf21185bd4ca04f5f7
Reviewed-on: https://go-review.googlesource.com/71291
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
- checking for the correct closing token leads to slightly better
behavior for some randomly bogus programs
- removed `switch` in favor of an `if` statement
Follow-up on https://go-review.googlesource.com/c/go/+/71250.
Change-Id: I47f6c47b43baf790907f55ed97a947661687a9db
Reviewed-on: https://go-review.googlesource.com/71252
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Fine-tune skipping of tokens after missing closing parentheses in lists.
Fixes#22164.
Change-Id: I575d86e21048cd40340a2c08399e8b0deec337cf
Reviewed-on: https://go-review.googlesource.com/71250
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Instead of repeating the same list parsing pattern for parenthesized
of braced comma or semicolon-separated lists, introduce a single list
parsing function that can be parametrized and which takes a closure
to parse list elements.
This ensures the same error handling and recovery logic is used across
all lists and simplifies the code.
No semantic change.
Change-Id: Ia738d354d6c2e0c3d84a5f1c7269a6eb95685edc
Reviewed-on: https://go-review.googlesource.com/70492
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
No semantic change. Move functionality not related to argument
out of the argument parsing function, and thus match parameter
parsing. Also, use a better function name.
Change-Id: Ic550875251d64e6fe1ebf91c11d33a9e4aec9fdd
Reviewed-on: https://go-review.googlesource.com/70491
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This re-enables functionality that inadvertently was disabled in the
(long) past.
Also, don't perform branch checks if we had errors in a function
to avoid spurious errors or (worst-case) crashes.
Slightly modified test/fixedbugs/issue14006.go to make sure the
test still reports invalid label errors (the surrounding function
must be syntactically correct).
Change-Id: Id5642930877d7cf3400649094ec75c753b5084b7
Reviewed-on: https://go-review.googlesource.com/69770
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The compiler replaces any path of the form /path/to/goroot/src/net/port.go
with GOROOT/src/net/port.go so that the same object file is
produced if the GOROOT is moved. It was skipping this transformation
for any absolute path into the GOROOT that came from //line directives,
such as those generated by cmd/cgo.
Fixes#21373Fixes#21720Fixes#21825
Change-Id: I2784c701b4391cfb92e23efbcb091a84957d61dd
Reviewed-on: https://go-review.googlesource.com/63693
Run-TryBot: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Fixes crash when printing a related error message later on.
Fixes#20789.
Change-Id: I6d2c35aafcaeda26a211fc6c8b7dfe4a095a3efe
Reviewed-on: https://go-review.googlesource.com/46713
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Instead of a separate check control flow pass (checkcfg.go)
operating on nodes, perform this check at parse time on the
new syntax tree. Permits this check to be done concurrently,
and doesn't depend on the specifics of the symbol's dclstack
implementation anymore. The remaining dclstack uses will be
removed in a follow-up change.
- added CheckBranches Mode flag (so we can turn off the check
if we only care about syntactic correctness, e.g. for tests)
- adjusted test/goto.go error messages: the new branches
checker only reports if a goto jumps into a block, but not
which block (we may want to improve this again, eventually)
- also, the new branches checker reports one variable that
is being jumped over by a goto, but it may not be the first
one declared (this is fine either way)
- the new branches checker reports additional errors for
fixedbugs/issue14006.go (not crucial to avoid those errors)
- the new branches checker now correctly reports only
variable declarations being jumped over, rather than
all declarations (issue 8042). Added respective tests.
Fixes#8042.
Change-Id: I53b6e1bda189748e1e1fb5b765a8a64337c27d40
Reviewed-on: https://go-review.googlesource.com/39998
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Now that we have consistent use of xOrNil parse methods, we don't
need a special missing_statement singleton to distinguish between
missing actually statements and other errors (which have returned
nil before).
For #19663.
Change-Id: I8364f1441bdf8dd966bcd6d8219b2a42d6b88abd
Reviewed-on: https://go-review.googlesource.com/38656
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
- parser creates sensible nodes in case of syntax errors instead of nil
- a new BadExpr node is used in places where we can't do better
- fixed error message for incorrect type switch guard
- minor cleanups
Fixes#19663.
Change-Id: I028394c6db9cba7371f0e417ebf93f594659786a
Reviewed-on: https://go-review.googlesource.com/38653
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Avoid construction of incorrect syntax trees in presence of errors.
For #19663.
Change-Id: I43025a3cf0fe02cae9a57e8bb9489b5f628c3fd7
Reviewed-on: https://go-review.googlesource.com/38604
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This simplifies the code and removes a premature optimization.
It increases the amount of allocated syntax.Node space by ~0.4%
for parsing all of std lib, which is negligible.
Before the change (best of 5 runs):
$ go test -run StdLib -fast
parsed 1517022 lines (3394 files) in 793.487886ms (1911840 lines/s)
allocated 387.086Mb (267B/line, 487.828Mb/s)
After the change (best of 5 runs):
$ go test -run StdLib -fast
parsed 1516911 lines (3392 files) in 805.028655ms (1884294 lines/s)
allocated 388.466Mb (268B/line, 482.549Mb/s)
Change-Id: Id19d6210fdc62393862ba3b04913352d95c599be
Reviewed-on: https://go-review.googlesource.com/38439
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This change adds position information for { and } braces in the
source. There's a 1.9% increase in memory use for syntax.Nodes,
which is negligible relative to overall compiler memory consumption.
Parsing the std library (using syntax package only) and memory
consumption before this change (fastest of 5 runs):
$ go test -run StdLib -fast
parsed 1516827 lines (3392 files) in 780.612335ms (1943124 lines/s)
allocated 379.903Mb (486.673Mb/s)
After this change (fastest of 5 runs):
$ go test -run StdLib -fast
parsed 1517022 lines (3394 files) in 793.487886ms (1911840 lines/s)
allocated 387.086Mb (267B/line, 487.828Mb/s)
While not an exact apples-to-apples comparison (the syntax package
has changed and is also parsed), the overall impact is small.
Also: Small improvements to nodes_test.go.
Change-Id: Ib8a7f90bbe79de33d83684e33b1bf8dbc32e644a
Reviewed-on: https://go-review.googlesource.com/38435
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Report syntax error that was missed when moving to new parser.
Fixes#19610.
Change-Id: Ie5625f907a84089dc56fcccfd4f24df546042783
Reviewed-on: https://go-review.googlesource.com/38375
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The new syntax tree introduced with 1.8 represents send statements
(ch <- x) as statements; the old syntax tree represented them as
expressions (and parsed them as such) but complained if they were
used in expression context. As a consequence, some of the errors
that in the past were of the form "ch <- x used as value" now look
like "unexpected <- ..." because a "<-" is not valid according to
Go syntax in those situations. Accept the new error message.
Also: Fine-tune handling of misformed for loop headers.
Also: Minor cleanups/better comments.
Fixes#17590.
Change-Id: Ia541dea1f2f015c1b21f5b3ae44aacdec60a8aba
Reviewed-on: https://go-review.googlesource.com/37386
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Until now, the parser set the position for each Node to the position of
the first token belonging to that node. For compatibility with the now
defunct gc parser, in many places that position information was modified
when the gcCompat flag was set (which it was, by default). Furthermore,
in some places, position information was not set at all.
This change removes the gcCompat flag and all associated code, and sets
position information for all nodes in a more principled way, as proposed
by mdempsky (see #16943 for details). Specifically, the position of a
node may not be at the very beginning of the respective production. For
instance for an Operation `a + b`, the position associated with the node
is the position of the `+`. Thus, for `a + b + c` we now get different
positions for the two additions.
This change does not pass toolstash -cmp because position information
recorded in export data and pcline tables is different. There are no
other functional changes.
Added test suite testing the position of all nodes.
Fixes#16943.
Change-Id: I3fc02bf096bc3b3d7d2fa655dfd4714a1a0eb90c
Reviewed-on: https://go-review.googlesource.com/37017
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Use distinction between explicit and automatically inserted semicolons
to provide a better error message if the condition in an 'if' statement
is missing.
For #18747.
Change-Id: Iac167ae4e5ad53d2dc73f746b4dee9912434bb59
Reviewed-on: https://go-review.googlesource.com/36930
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Added missing nil-check. We will get rid of the gcCompat corrections
shortly but it's still worthwhile having the new test case added.
Fixes#19056.
Change-Id: I35bd938a4d789058da15724e34c05e5e631ecad0
Reviewed-on: https://go-review.googlesource.com/36908
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The gcCompat mode was introduced to match the new parser's node position
setup exactly with the positions used by the original parser. Some of the
gcCompat adjustments were required to satisfy syntax error test cases,
and the rest were required to make toolstash cmp pass.
This change removes the former gcCompat adjustments and instead adjusts
the respective test cases as necessary. In some cases this makes the error
lines consistent with the ones reported by gccgo.
Where it has changed, the position associated with a given syntactic construct
is the position (line/col number) of the left-most token belonging to the
construct.
Change-Id: I5b60c00c5999a895c4d6d6e9b383c6405ccf725c
Reviewed-on: https://go-review.googlesource.com/36695
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Starting the error message with "expecting" rather than "missing"
causes the syntax error mechanism to add additional helpful info
(it recognizes "expecting" but not "missing").
Fixes#17328.
Change-Id: I8482ca5e5a6a6b22e0ed0d831b7328e264156334
Reviewed-on: https://go-review.googlesource.com/36637
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Towards better syntax error messages: With this change, the parser knows whether
a semicolon was an actual ';' in the source, or whether it was an automatically
inserted semicolon as result of a '\n' or EOF. Using this information in error
messages makes them more understandable.
For #17328.
Change-Id: I8cd9accee8681b62569d0ecef922d38682b401eb
Reviewed-on: https://go-review.googlesource.com/36636
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This is a follow-up on https://go-review.googlesource.com/36470
and leads to a more stable fix. The above CL relied on filtering
of multiple errors on the same line to avoid more than one error
for an `if` statement of the form `if a := 10 {}`. This CL avoids
the secondary error ("missing condition in if statement") in the
first place.
For #18915.
Change-Id: I8517f485cc2305965276c17d8f8797d61ef9e999
Reviewed-on: https://go-review.googlesource.com/36479
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
For code such as
if a := 10 { ...
the 1.7 compiler reported
a := 10 used as value
while the 1.8 compiler reported
invalid condition, tag, or type switch guard
Changed the error message to match the 1.7 compiler.
Fixes#18915.
Change-Id: I01308862e461922e717f9f8295a9db53d5a914eb
Reviewed-on: https://go-review.googlesource.com/36470
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This replaces the src.Pos LineHist-based position tracking with
the syntax.Pos implementation and updates all uses.
The LineHist table is not used anymore - the respective code is still
there but should be removed eventually. CL forthcoming.
Passes toolstash -cmp when comparing to the master repo (with the
exception of a couple of swapped assembly instructions, likely due
to different instruction scheduling because the line-based sorting
has changed; though this is won't affect correctness).
The sizes of various important compiler data structures have increased
significantly (see the various sizes_test.go files); this is probably
the reason for an increase of compilation times (to be addressed). Here
are the results of compilebench -count 5, run on a "quiet" machine (no
apps running besides a terminal):
name old time/op new time/op delta
Template 256ms ± 1% 280ms ±15% +9.54% (p=0.008 n=5+5)
Unicode 132ms ± 1% 132ms ± 1% ~ (p=0.690 n=5+5)
GoTypes 891ms ± 1% 917ms ± 2% +2.88% (p=0.008 n=5+5)
Compiler 3.84s ± 2% 3.99s ± 2% +3.95% (p=0.016 n=5+5)
MakeBash 47.1s ± 1% 47.2s ± 2% ~ (p=0.841 n=5+5)
name old user-ns/op new user-ns/op delta
Template 309M ± 1% 326M ± 2% +5.18% (p=0.008 n=5+5)
Unicode 165M ± 1% 168M ± 4% ~ (p=0.421 n=5+5)
GoTypes 1.14G ± 2% 1.18G ± 1% +3.47% (p=0.008 n=5+5)
Compiler 5.00G ± 1% 5.16G ± 1% +3.12% (p=0.008 n=5+5)
Change-Id: I241c4246cdff627d7ecb95cac23060b38f9775ec
Reviewed-on: https://go-review.googlesource.com/34273
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
- make the scanner unconditionally gc compatible
- consistently use "invalid" instead "illegal" in errors
Reviewed in and cherry-picked from https://go-review.googlesource.com/#/c/33896/.
Change-Id: I4c4253e7392f3311b0d838bbe503576c9469b203
Reviewed-on: https://go-review.googlesource.com/34237
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
- use syntax.Pos in syntax.Error (rather than line, col)
- use syntax.Pos in syntax.PragmaHandler (rather than just line)
- update uses
- better documentation in various places
Also:
- make Pos methods use Pos receiver (rather than *Pos)
Reviewed in and cherry-picked from https://go-review.googlesource.com/#/c/33891/.
With minor adjustments to noder.go to make merge compile.
Change-Id: I5507cea6c2be46a7677087c1aeb69382d31033eb
Reviewed-on: https://go-review.googlesource.com/34236
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed in and cherry-picked from https://go-review.googlesource.com/#/c/33873/.
- simplify error handling in source.go
(move handling of first error into parser, where it belongs)
- clean up error handling in scanner.go
- move pragma and position base handling from scanner
to parser where it belongs
- have separate error methods in parser to avoid confusion
with handlers from scanner.go and source.go
- (source.go) and (scanner.go, source.go, tokens.go)
may be stand-alone packages if so desired, which means
these files are now less entangled and easier to maintain
Change-Id: I81510fc7ef943b78eaa49092c0eab2075a05878c
Reviewed-on: https://go-review.googlesource.com/34235
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed in and cherry-picked from https://go-review.googlesource.com/#/c/33764/.
Minor adjustment in noder.go to make merge compile again.
Change-Id: Ib5029b52b59944f207b0f2438c8a5aa576eb25b8
Reviewed-on: https://go-review.googlesource.com/34233
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
- define syntax.Error for cleaner error reporting
- abort parsing after first error if no error handler is installed
- make sure to always report the first error, if any
- document behavior of API calls
- while at it: rename ReadXXX -> ParseXXX (clearer)
- adjust cmd/compile noder.go accordingly
Fixes#17774.
Change-Id: I7893eedea454a64acd753e32f7a8bf811ddbb03c
Reviewed-on: https://go-review.googlesource.com/32950
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This reverts commit 32db3f2756324616b7c856ac9501deccc2491239.
Reason: Decision to back out current alias implementation.
For #16339.
Change-Id: Ib05e3d96041d8347e49cae292f66bec791a1fdc8
Reviewed-on: https://go-review.googlesource.com/32825
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
If no error handler is provided, terminate parsing with first error
and report that error.
Fixes#17697.
Change-Id: I9070faf7239bd53725de141507912b92ded3474b
Reviewed-on: https://go-review.googlesource.com/32456
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
I had added this originally so we can play with different notations
but it doesn't make sense to keep it around since gofmt will convert
a type alias declaration using "=" into one using "=>" anyhow. More
importantly, the spec doesn't permit it.
Change-Id: Icb010b5a9976aebf877e48b3ce9d7245559ca494
Reviewed-on: https://go-review.googlesource.com/32105
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This adds a //go:notinheap pragma for declarations of types that must
not be heap allocated. We ensure these rules by disallowing new(T),
make([]T), append([]T), or implicit allocation of T, by disallowing
conversions to notinheap types, and by propagating notinheap to any
struct or array that contains notinheap elements.
The utility of this pragma is that we can eliminate write barriers for
writes to pointers to go:notinheap types, since the write barrier is
guaranteed to be a no-op. This will let us mark several scheduler and
memory allocator structures as go:notinheap, which will let us
disallow write barriers in the scheduler and memory allocator much
more thoroughly and also eliminate some problematic hybrid write
barriers.
This also makes go:nowritebarrierrec and go:yeswritebarrierrec much
more powerful. Currently we use go:nowritebarrier all over the place,
but it's almost never what you actually want: when write barriers are
illegal, they're typically illegal for a whole dynamic scope. Partly
this is because go:nowritebarrier has been around longer, but it's
also because go:nowritebarrierrec couldn't be used in situations that
had no-op write barriers or where some nested scope did allow write
barriers. go:notinheap eliminates many no-op write barriers and
go:yeswritebarrierrec makes it possible to opt back in to write
barriers, so these two changes will let us use go:nowritebarrierrec
far more liberally.
This updates #13386, which is about controlling pointers from non-GC'd
memory to GC'd memory. That would require some additional pragma (or
pragmas), but could build on this pragma.
Change-Id: I6314f8f4181535dd166887c9ec239977b54940bd
Reviewed-on: https://go-review.googlesource.com/30939
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Permits parsing of alias declarations with -newparser
const/type/var/func T => p.T
but the compiler will reject it with an error. For now this
also accepts
type T = p.T
so we can experiment with a type-alias only scenario.
- renamed _Arrow token to _Larrow (<-)
- introduced _Rarrow token (=>)
- introduced AliasDecl node
- extended scanner to accept _Rarrow
- extended parser and printer to handle alias declarations
Change-Id: I0170d10a87df8255db9186d466b6fd405228c38e
Reviewed-on: https://go-review.googlesource.com/29355
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
